VX Pro Series · the 4K60 all-in-one
Rated at 6,500,000 pixels, up to 10,240 px wide or 8,192 px high
On quote
In stock, Los Angeles
3-year warranty · Commissioned in-house by NovaStar NCE-certified engineers · Installation available under CSLB #1063528 (General B) across Orange County, Greater Los Angeles, San Diego, San Francisco Bay Area, Las Vegas, New York, New Jersey, Florida
Price, stock and shipping confirmed within one business day.
Specifications
Read from NovaStar's published specification document. Read twice from the same document: once as extracted text, once rendered as an image and read by eye. The two reads agree.
Source: NovaStar VX1000 Pro All-in-One Controller Specifications V1.0.1, checked 2026-10-16. Firmware and hardware revisions move these numbers and we are not notified, so the date is part of the specification. Ask and we will confirm any row against the current document before you order.
Official NovaStar files and pages, links checked 2026-10-16. NovaStar revises these without notice; ask and we will send the current version.
Sizing
Each line below follows from the table above or, where it says so, from our own commissioning. Either side of the VX1000 Pro sits a model that suits a different shape of job. We will not print a pixel count at which you should switch: that depends on your cabinet, and we would rather check the layout than have you act on a number we made up.
There is one HDMI 2.0 input. The two HDMI 1.3 inputs and the 3G-SDI take up to 1920 × 1080 at 60 Hz.
There is no DVI input. The VX1000 has two.
4K × 2K at 60 Hz is 8-bit. At 10- or 12-bit, 4K × 2K runs up to 30 Hz.
That is the rated capacity. The COEX MX40 Pro is rated at 9 million.
It is run from the front-panel knob, the Unico web page in a browser, the VICP app or NovaLCT. In our experience Unico is easier to pick up than NovaLCT, but it does far less than VMP on a COEX controller. The MX30 is the COEX model nearest in capacity.
See the MX30 →A 3.9 million pixel wall fed with 4K: the HDMI 2.0 input takes 4096 × 2160 at 60 Hz, where the VX600 tops out at 1920 × 1200. Six layer resources instead of three layers. If every source is 1080p, the plain VX600 does the same job.
Pick the Pro over the VX1000 when the source is 4K at 60 Hz: its HDMI 2.0 input takes 4096 × 2160 at 60 Hz at 8-bit, where the VX1000 stops at 4K30. Same 6.5 million pixels over 10 Gigabit ports. It has no DVI input, so a DVI source needs converting.
Compare side by side: VX1000 or VX1000 Pro? · Which NovaStar processor do I need?
What else the run needs
What decides a controller purchase is rarely the controller. It is whether the unit is on a shelf near you, who maps your cabinets, and whether the cable and power for the run ship with it.
Send the cabinet model and the layout. If the VX1000 Pro is the wrong tier for that pixel count, we will say so before the invoice, not after the wall is up. Over-specifying costs you money; under-specifying costs you the project.
NCE certification means the person who maps your cabinets works here. No factory escalation, no time-zone gap on a load-in day, and the same engineer is still reachable when phase two starts.
Cat6 snakes, fiber, and Socapex and Camlock distribution for the same run are stocked in Anaheim, so the install does not stop while a cable ships. See the cable catalog →
On project and multi-unit purchases, send the cabinet count and ask for a quote.
Questions
Quoted rather than listed: NovaStar publishes no advertised price for the VX Pro line. Send the cabinet count and install date and a written quote comes back the same business day.
Total the finished pixel count, including whatever phase two adds, and compare it against the rated loading capacity above. Pick the Pro over the VX1000 when the source is 4K at 60 Hz: its HDMI 2.0 input takes 4096 × 2160 at 60 Hz at 8-bit, where the VX1000 stops at 4K30. Same 6.5 million pixels over 10 Gigabit ports. It has no DVI input, so a DVI source needs converting.
They are read from NovaStar’s own published specification document rather than copied from another seller. The document and the date we checked it are printed under the table, so you can verify any row rather than take our word for it.
Common controller models, the VX1000 Pro among them, are held at 3111 E Miraloma Ave, Anaheim. Send the cabinet model and layout and we will confirm availability against your install date in the same reply.
Our own engineers. NovaStar NCE certification is held in-house, so cabinet mapping and fault diagnosis happen here rather than as a support ticket into a factory queue — which on a load-in day is the difference between a fix today and a fix after the time-zone gap closes.
Both. Installation is performed under California contractor license CSLB #1063528 (General B), which is what allows us to touch structure, conduit and power rather than only hang a screen. We also sell the controller on its own to integrators running their own build.
Scan with your phone to chat on WhatsApp: (626) 861-4292