H Series · splicing in two rack units
Up to 4 input cards (16 inputs) and 2 output cards, 32 layers
$669Chassis only. Input and sending cards are extra.
In stock, Los Angeles
3-year warranty · Commissioned in-house by NovaStar NCE-certified engineers · Installation available under CSLB #1063528 (General B) across Orange County, Greater Los Angeles, San Diego, San Francisco Bay Area, Las Vegas, New York, New Jersey, Florida
Price, stock and shipping confirmed within one business day.
Specifications
Read from NovaStar's published specification document. Read twice from the same document: once as extracted text, once rendered as an image and read by eye. The two reads agree.
Source: NovaStar H2 Video Wall Splicer Specifications V1.14.0, checked 2026-10-16. Firmware and hardware revisions move these numbers and we are not notified, so the date is part of the specification. Ask and we will confirm any row against the current document before you order.
Official NovaStar files and pages, links checked 2026-10-16. NovaStar revises these without notice; ask and we will send the current version.
Sizing
Each line below follows from a row of the table above. Either side of the H2 sits a model that suits a different shape of job. We will not print a pixel count at which you should switch: that depends on your cabinet, and we would rather check the layout than have you act on a number we made up.
The price is the empty chassis. Input and sending cards are specified to the port plan and quoted with it.
There is not one. It depends on the sending card: 20.8 million pixels on the 16 × RJ45 + 2 × fiber card, 26 million on the 20 × RJ45, 41.6 million on the 4 × fiber.
The H5 takes up to 40 inputs on 10 cards and 48 layers.
The H Series in two rack units: up to 16 inputs on 4 cards and 32 layers. Capacity depends on the sending card, from 20.8 million pixels on the 16-port card to 41.6 million on the four-fiber card, so the card list is decided with the wall. The price buys the chassis alone.
Specify the H5 when the number of sources is the problem: up to 40 inputs on 10 cards and 48 layers, for control rooms where many feeds tile one wall. The price is the empty chassis. The cards usually cost several times more, so compare a configured quote with an all-in-one box, never the chassis price.
Compare side by side: Which NovaStar processor do I need?
What else the run needs
What decides a controller purchase is rarely the controller. It is whether the unit is on a shelf near you, who maps your cabinets, and whether the cable and power for the run ship with it.
Send the cabinet model and the layout. If the H2 is the wrong tier for that pixel count, we will say so before the invoice, not after the wall is up. Over-specifying costs you money; under-specifying costs you the project.
NCE certification means the person who maps your cabinets works here. No factory escalation, no time-zone gap on a load-in day, and the same engineer is still reachable when phase two starts.
Cat6 snakes, fiber, and Socapex and Camlock distribution for the same run are stocked in Anaheim, so the install does not stop while a cable ships. See the cable catalog →
On project and multi-unit purchases, send the cabinet count and ask for a quote.
Questions
$669 at PixelPro Productions in Anaheim, California, for a single chassis, with no cards: input and sending cards are extra and quoted to the port plan. It carries a 3-year warranty. Project and multi-unit pricing is quoted privately — send the cabinet count and the install date and a written quote comes back the same business day.
Total the finished pixel count, including whatever phase two adds, and compare it against the rated loading capacity above. The H Series in two rack units: up to 16 inputs on 4 cards and 32 layers. Capacity depends on the sending card, from 20.8 million pixels on the 16-port card to 41.6 million on the four-fiber card, so the card list is decided with the wall. The price buys the chassis alone.
They are read from NovaStar’s own published specification document rather than copied from another seller. The document and the date we checked it are printed under the table, so you can verify any row rather than take our word for it.
Common controller models, the H2 among them, are held at 3111 E Miraloma Ave, Anaheim. Send the cabinet model and layout and we will confirm availability against your install date in the same reply.
Our own engineers. NovaStar NCE certification is held in-house, so cabinet mapping and fault diagnosis happen here rather than as a support ticket into a factory queue — which on a load-in day is the difference between a fix today and a fix after the time-zone gap closes.
Both. Installation is performed under California contractor license CSLB #1063528 (General B), which is what allows us to touch structure, conduit and power rather than only hang a screen. We also sell the controller on its own to integrators running their own build.
Other H Series splicers: H5
Scan with your phone to chat on WhatsApp: (626) 861-4292